For screen reader problems with this website, please call705-949-70007 0 5 9 4 9 7 0 0 0Standard carrier rates apply to texts.





Product Dimensions 37.5"h x 27"w x 29"d
Built for shared laundry rooms, managed properties and other commercial settings, the Whirlpool Commercial CGD9160GW combines a 6.7 cu. ft. gas drying cylinder with programmable microprocessor controls and a non-vend, card-reader-ready configuration. A commercial-grade steel cabinet, porcelain-enamel top, reversible heavy-duty door and front service access support demanding daily use, while simple one-touch cycle selection keeps operation approachable for users.Read More
Order TodayWhile on Sale
The 6.7 cu. ft. / 190 L drying cylinder handles loads from small to large in busy shared-laundry environments. A large 18.25-inch door opening helps make loading and unloading straightforward.
6.7 cu. ft. / 190 L capacity with 18.25-inch door opening
CGD9160GW is supplied without a factory coin drop. Its non-vend configuration provides a dedicated payment-system area for compatible card-reader integration; card-reader equipment and any third-party payment system are sold separately and require installation and configuration.
Card-reader-ready payment area; hardware sold separately
Microprocessor controls support operator programming and intuitive diagnostics, while one-touch cycle selection provides clear choices for users. The simple programming design helps operators place the dryer into service efficiently.
Operator programming, diagnostics and one-touch cycle selection
A commercial-grade steel cabinet and porcelain-enamel top are designed to withstand frequent use. The reversible door uses heavy-duty die-cast hinges to support repeated opening and accommodate different room layouts.
Steel cabinet, porcelain-enamel top and die-cast hinges
The front-access panel provides convenient entry to internal service areas, helping simplify routine maintenance. A large lint screen supports regular cleaning in high-use laundry rooms.
Front service access and commercial lint-management design
The dryer uses a 22,000 BTU/h gas burner and a 1/3-HP motor for commercial drying performance. Electrical requirements are 120 V, 60 Hz on a 15 A circuit, and the gas inlet is 3/8-inch NPT.
22,000 BTU/h gas input and 1/3-HP motor
At 27 inches wide, 29 inches deep and 37.5 inches high, the dryer is designed for commercial laundry layouts. The unit can exhaust from the rear or either side and requires a 4-inch rigid aluminum or galvanized-steel exhaust duct.
Rear, left-side or right-side exhaust; 4-inch rigid metal duct
Whirlpool identifies CGD9160GW as ADA compliant with or without an optional pedestal. Compatible 4-inch WHP0400VW and 10-inch WHP1000VW pedestals are sold separately.
ADA compliant with or without optional pedestal
Manufacturer coverage includes 90 days of labour and a two-year limited parts-only warranty. See the manufacturer warranty for complete terms, conditions and exclusions.
90-day labour and two-year limited parts-only coverage
General Specs | |
| Color | White |
| Color-Finish Name | White |
| Color/Finish Name | White |
| Door Color | White |
| Handle Color | White |
| Total Capacity (cu. ft.) | 6.7 |
| Dryer Fuel Type | Natural Gas |
| Door Swing Option | Reversible |
| Dryer Vent Type | Ventless |
| Door Panel Type | Glass Panel |
| Dryer Features | Commercial Use Approved, Front Controls, Lint Filter |
| Commercial Use Approved | Yes |
| Appliance Fit Width (in.) | 27 |
| Appliance Fit Width (cm) | 68.6 |
| Width (in.) | 27 |
| Width (cm) | 68.6 |
| Depth (in.) | 29 |
| Depth (cm) | 73.6 |
| Height (in.) | 37.5 |
| Height (cm) | 95.2 |
| Shipping Width (in.) | 29.5 |
| Shipping Width (cm) | 74.9 |
| Shipping Depth (in.) | 31 |
| Shipping Depth (cm) | 78.7 |
| Shipping Height (in.) | 44 |
| Shipping Height (cm) | 111.8 |
| Product Weight (lbs.) | 150 |
| Product Weight (kg) | 68 |
| Weight Kilogram | 74 |
| Manufacturer Warranty | 90-day labour; two-year limited parts-only warranty |
| ADA Compliant | Yes |
| Voltage | 120 V |
| Amp | 15 A |
| Frequency | 60 Hz |
Technical Specifications | |
| Model | CGD9160GW |
| Brand | Whirlpool Commercial |
| Product Type | Non-vend gas front-load dryer |
| Payment Configuration | Non-vend / card-reader-ready; payment hardware not included |
| Capacity | 6.7 cu. ft. / 190 L |
| Cylinder Diameter | 26.25 in. / 66.7 cm |
| Cylinder Depth | 20.5 in. / 52.1 cm |
| Width | 27 in. / 68.6 cm |
| Depth | 29 in. / 73.6 cm |
| Height | 37.5 in. / 95.2 cm |
| Door Opening | 18.25 in. / 46.4 cm |
| Product Weight | 150 lb. / 68 kg |
| Crated Dimensions | 29.5 W x 31 D x 44 H in. |
| Crated Weight | 163 lb. / 74 kg |
| Motor | 1/3 HP / 0.25 kW |
| Gas Input | 22,000 BTU/h |
| Gas Inlet | 3/8 in. NPT |
| Electrical Supply | 120 V / 60 Hz / 15 A |
| Exhaust Duct | 4 in. rigid aluminum or galvanized-steel duct |
| Exhaust Locations | Rear, left side or right side |
| Controls | Microprocessor controls with one-touch cycle selection |
| Diagnostics | Intuitive service diagnostics |
| Service Access | Front-access panel |
| Door | Reversible with heavy-duty die-cast hinges |
| Cabinet | Commercial-grade steel cabinet |
| Top | Porcelain enamel |
| Optional Pedestals | WHP0400VW 4 in.; WHP1000VW 10 in., sold separately |
| ADA Compliance | Yes, with or without pedestal |
| Colour | White |
| Warranty | 90-day labour; two-year limited parts-only warranty |