For screen reader problems with this website, please call705-949-70007 0 5 9 4 9 7 0 0 0Standard carrier rates apply to texts.





Product Dimensions 74"h x 27"w x 29.5"d
Maximize commercial laundry capacity in a compact 27-inch footprint with the Whirlpool Commercial CGT9000GQ combination stack, pairing a 3.1 cu. ft. front-load washer with a 6.7 cu. ft. gas dryer. Its factory-installed coin slide and coin box, front microprocessor controls, commercial-grade galvanized-steel construction and automatic load-balancing system support busy shared and vended laundry facilities.Read More
Order TodayWhile on Sale
CGT9000GQ combines a full-size commercial front-load washer and gas dryer in one 27-inch-wide vertical footprint. The stacked configuration helps property managers and laundry operators increase available washing and drying capacity where floor space is limited.
3.1 cu. ft. washer and 6.7 cu. ft. gas dryer in one cabinet
This model is the coin-equipped CGT9000GQ configuration identified by Whirlpool's exact specification sheet and genuine product photography. A factory-installed coin slide and secure coin box provide an integrated payment setup for vended commercial laundry locations.
Factory-installed coin slide and secure coin box
The 3.1 cu. ft. / 88 L washer reaches up to 1,000 RPM and 300 G extraction. Its 1/2-HP motor, 21.6-inch-diameter cylinder and approximately 12.24-gallon average total water usage per cycle provide exact, practical performance information for installation and operating decisions.
1,000 RPM / 300 G maximum extraction with 1/2-HP motor
The 6.7 cu. ft. / 190 L gas dryer uses a 22,000 BTU/h burner and a 1/3-HP motor. A 4-inch exhaust connection supports conventional vented commercial-dryer installation.
22,000 BTU/h gas input and 4-inch exhaust duct
Front microprocessor controls let owners customize vend pricing and washer cycle options. The control system also gives users direct cycle selections for the dryer and washer from the central front control area.
Flexible cycle and vend-price programming
The washer uses a six-point suspension with four dampers and two springs. By sensing and automatically balancing the load, the system helps the washer operate effectively through the programmed cycle.
Six-point washer suspension with four dampers and two springs
Galvanized-steel construction is designed for the repeated demands of commercial laundry. The washer drive system uses a watertight flexible triple-lip seal with a garter spring to help keep moisture away from the shaft, together with premium bearings and a durable shaft sleeve.
Galvanized-steel cabinet and commercial washer drive components
Separate front-loading doors provide a 14.25-inch washer opening and an 18.25-inch dryer opening. The vertical layout keeps both control sets together while preserving the floor space of a single unit.
14.25-inch washer door opening and 18.25-inch dryer door opening
The stack measures 27 inches wide, 29.5 inches deep and 74 inches high. The gas configuration requires 120 V, 60 Hz, 15 A electrical service, a 3/8-inch NPT gas inlet and a 4-inch dryer exhaust connection; follow the installation guide for clearances, utilities and venting.
120 V / 60 Hz / 15 A; 3/8-inch NPT gas inlet; 4-inch exhaust
The manufacturer specification identifies the washer as ENERGY STAR certified and ADA compliant. Its listed average total water usage is 12.24 gallons / 46.33 litres per cycle based on the referenced DOE J2 test method and factory preset cycles.
ENERGY STAR certified washer and ADA-compliant configuration
Manufacturer coverage is listed as 90 days of labour with a two-year limited parts-only warranty. See the manufacturer warranty for complete terms, conditions and exclusions.
90-day labour and two-year limited parts-only coverage
General Specs | |
| Color | White |
| Color-Finish Name | White |
| Color/Finish Name | White |
| Door Color | Black/White |
| Handle Color | White |
| Type of Washer | Front Load |
| Commercial Use Approved | Yes |
| Dryer Fuel Type | Natural Gas |
| Dryer Vent Type | Vented |
| Appliance Fit Width (in.) | 27 |
| Appliance Fit Width (cm) | 68.6 |
| Width (in.) | 27 |
| Width (cm) | 68.6 |
| Depth (in.) | 29.5 |
| Depth (cm) | 75.1 |
| Depth w/Door Open 90 Degrees (in.) | 51 |
| Depth With Door Open 90 Degrees (cm) | 129.5 |
| Height (in.) | 74 |
| Height (cm) | 188 |
| Shipping Depth (in.) | 34 |
| Shipping Depth (cm) | 86.4 |
| Shipping Width (in.) | 29.25 |
| Shipping Width (cm) | 74.3 |
| Shipping Height (in.) | 75.75 |
| Shipping Height (cm) | 192.4 |
| Product Weight (kg) | 171 |
| Product Weight (lbs.) | 378 |
| Weight Kilogram | 176 |
| Manufacturer Warranty | 90-day labour; two-year limited parts-only warranty |
| ADA Compliant | Yes |
| ENERGY STAR Certified | Yes |
| Voltage | 120 V |
| Amp | 15 A |
| Frequency | 60 Hz |
Technical Specifications | |
| Manufacturer Model | CGT9000GQ |
| Brand | Whirlpool Commercial |
| Product Type | Combination stacked front-load washer / gas dryer |
| Payment Configuration | Coin equipped with factory-installed coin slide and coin box |
| Control Type | Front microprocessor controls |
| Washer Capacity | 3.10 cu. ft. / 88 L |
| Washer Cylinder Diameter | 21.60 in. / 547 mm |
| Washer Cylinder Depth | 13.40 in. / 340 mm |
| Washer Door Opening | 14.25 in. / 362 mm |
| Maximum Extraction | 1,000 RPM / 300 G |
| Washer Motor | 1/2 HP / 0.37 kW |
| Integrated Water Factor | 4 |
| Modified Energy Factor | 2.2 |
| Water Inlet Operating Pressure | 20-100 psi / 1-8 bar |
| Inlet Hose Length | 4 ft. / 1.22 m |
| Drain Hose Length | 6 ft. / 1.83 m |
| Average Total Water Use | 12.24 gal. / 46.33 L per cycle |
| Average Hot Water Use - Warm Cycle | 1.5 gal. / 5.67 L |
| Average Hot Water Use - Hot Cycle | 2.28 gal. / 8.63 L |
| Washer Suspension | Six-point system with four dampers and two springs |
| Dryer Capacity | 6.70 cu. ft. / 190 L |
| Dryer Cylinder Diameter | 26.3 in. / 666.8 mm |
| Dryer Cylinder Depth | 20.4 in. / 518.3 mm |
| Dryer Door Opening | 18.25 in. / 464 mm |
| Dryer Motor | 1/3 HP / 0.25 kW |
| Gas Input | 22,000 BTU/h / 5,544 kcal/h |
| Gas Inlet | 3/8 in. NPT |
| Dryer Exhaust Duct | 4 in. / 100 mm diameter |
| Electrical Requirement | 120 V / 60 Hz / 15 A |
| Overall Dimensions | 27 W x 29.5 D x 74 H in. / 686 W x 751 D x 1,880 H mm |
| Approximate Product Weight | 378 lb. / 171 kg |
| Crated Dimensions | 29.25 W x 34 D x 75.75 H in. / 743 W x 864 D x 1,924 H mm |
| Crated Weight | 389 lb. / 176 kg |
| Colour | White |
| Certifications | Washer ENERGY STAR certified; ADA compliant |
| Warranty | 90-day labour; two-year limited parts-only warranty |